Hamilton Beach HB-165 用户手册

4.  Turn the safety cap slowly a half turn and wait for the hissing noise created by any 

residual steam to stop. Unscrew the cap without removing it, wait 30 seconds 

and then take off the cap and allow to cool.

5.  slowly pour one measuring cup of water into the steam cleaner using the funnel.  

do not overfill. screw the safety cap back on the steam cleaner. Plug the steam 

cleaner into electrical outlet and steam will emit shortly.

The steam cleaner comes with several attachments. The straight nozzle (fig. 5/1), the 
flexible hose (fig. 5/2), and the fabric nozzle tool (fig. 5/3). all attach directly to the steam 
cleaner using the following directions.

1.  align the two guide pins on the attachment with the guide openings on the 

nose of the steam cleaner where the steam exits. Push the attachment into 

the opening until it stops against the steamer’s body. Turn a quarter turn in a 

clockwise direction until the attachment locks into place. The attachment is now 

locked into position and safe to use.

1.  The straight nozzle and fabric nozzle tool also attach to the flexible hose for 

mobility and an added reach.

2.  Insert the straight nozzle or fabric nozzle tool in the same way and turn clockwise 

until the attachment locks in place. To release, pull back the red safety pin at 

the end of the flexible hose, turn the accessory counter clockwise and pull the 

accessory to remove from the hose (fig. 5/4).

1. The remaining accessories are to be used along with the above attachments. This 

includes the following:

straight nozzle (fig. 5/1)

flexible hose (fig. 5/2) 

fabric nozzle tool (fig 5/3)

fig 5/4