Honeywell 62-2030-01 用户手册

62-2030—01

26

Use this page to set time for an Stryker VAV device on the LON network. This action can be performed with the device in online 

mode. The controller must be in a commissioned state. Using 

Set Time feature, you can specify time or use the computer's time 

in the controller. While performing this online operation, the device should not be used by another application.

The online operations can be invoked on the Stryker VAV 

device only if the device is not in use by another application.

You can perform following online operations:

1. Download - Perform this action to download the config-

uration from tool to controller.

2. Upload - Invoke this option to read configuration data 

from the controller and update the same in the tool data-

base.

3. Calibration - Use this option to calibrate the sensor 

connected to the controller. 

4. Diagnostics - Use this feature to command the device 

to manual mode and to test the outputs.

5. Set Time - Use this option to set the date and time in 

the controller.

6. Flow Balancing - The flow balancing feature allows 

minimum balancing, maximum balancing, zero balanc-

ing and k factor balancing.

You can also balance the reheat and peripheral heat 

valves.

You can also reset the balancing values to factory 

defaults.

7. Monitoring - Use the monitoring option to view key 

parameters in the controller.

You can also temporarily override setpoints and occu-

pancy status.

8. Alarms - Use the Alarms option to view the list of 

alarms generated by the controller.

1

From the 

Nav menu, choose Station > Driver > LON network > AscLonVAV device.

2

Right-click the device and choose 

Views > Set Time from device items.

3

The 

Set Time screen appears.

4

Enter information in the available fields.

5

Click 

Apply to set date and time in device.

Date

This option enables you to set date in the controller.

Time

This option enables you to set time in the controller.