Monte Carlo Fan Company 5CLR66XXD Series 用户手册

Align the blade and then the blade

plate with castings on motor to

attach blades to motor. 

Loosen 2 screws and remove 1

screw. Save screw removed. 

Twist lower cover plate into place by

twisting in direction of arrow.

Replace 1 screw removed and tighten

all 3 screws securely.  

Loosen 3 screws on light plate as

shown.

Plug white wire from fan to white

wire from light kit. Then plug black

wire from fan to black wire from light

kit.

Place light kit over screws and twist

direction of arrow into place. Then

tighten all 3 screws securely.

Install glass onto light kit, install

rubber washer on the top side of the

screw nut to hold in place  and tight-

en in direction of arrow. 

Install 3 x 60 watt candelabra bulbs.

Bulbs not included.   

Install cage and finial cap and tight-

en in direction of arrow. 

Remove cover by snaping off from top or bot-

tom. Remove battery cover. Install 12V battery

into wall remote. Duracell MN21 / Eveready A23

/ GP 23A all 12V.Attach cover of remote by plac-

ing over buttons and snap the battery cover in

place.

Place face plate over battery compartment and

buttons. Place remote over 2 pins on front

cover. Attach cover of remote by placing over 4

pins and snaping into place.

Install wall control unit to outlet box

using machine screws provided.

HAND HELD INSTALL

WALL MOUNT INSTALL