Pelco SD5TAC 用户手册
4
Pelco Manual C2422M (5/00)
OPERATION
POWER-UP DISPLAY
When the Spectra Lite™ dome is powered up, the selected protocol, revision number, and
other information is displayed on the monitor. For example, the screen might show the
following information:
other information is displayed on the monitor. For example, the screen might show the
following information:
The information displayed depends on the selected
protocol (C, D, or P) and the menu selection for power-
up mode. (Refer to the
protocol (C, D, or P) and the menu selection for power-
up mode. (Refer to the
Power-Up Mode in the
Programming
section).
The information remains on the monitor until the dome
is moved.
is moved.
HOW TO OPERATE YOUR SPECTRA LITE DOME
Operation
How to Control
Pan and Tilt
Move joystick left/right and up/down.
Scanning
Stop Scan
Preset 96
Random Scan
Preset 97
Frame Scan
Preset 98
Auto Scan
Preset 99
Zoom Far
To zoom far, do the following:
1. Press the Zoom Tele button or turn the joystick clockwise until you have the picture you want or you
reach the zoom limit.
2. Release the button or joystick.
Zoom Wide
Press the Zoom Wide button or turn the joystick counterclockwise.
Presets
Refer to the documentation supplied with the controller.
Auto Flip
Turn on or off in the programming menu. Refer to the
Programming Guide
in the
Programming
section.
For more information, refer to
Operating Notes
.
PELCO SPECTRA LITE
CONFIGURE DONE
CONFIGURE DONE
Protocol C