Crimestopper Security Products CS-9704 用户手册
CS-9704RS
INTEGRATED ALARM/REMOTE START SYSTEM
INSTALLATION / OPERATING MANUAL
INTRODUCTION:
This is a combination vehicle security alarm and tach-less remote start system for 12-volt motor vehicles. There
are a variety of built-in features, which you may or may not use. Some require the addition of a relay, diode or
other component to function properly, which is not included in the kit. Additional labor and parts will be required
for some vehicle with Anti-Theft Systems such as GM PassKey/Passlock/VATS, or Key-FOB based RF
Transponder systems. This system is designed for single vehicle operation with automatic transmissions only.
Technical support is available from the following sources:
This is a combination vehicle security alarm and tach-less remote start system for 12-volt motor vehicles. There
are a variety of built-in features, which you may or may not use. Some require the addition of a relay, diode or
other component to function properly, which is not included in the kit. Additional labor and parts will be required
for some vehicle with Anti-Theft Systems such as GM PassKey/Passlock/VATS, or Key-FOB based RF
Transponder systems. This system is designed for single vehicle operation with automatic transmissions only.
Technical support is available from the following sources:
TECHNICAL
SUPPORT (800)-998-6880
Monday - Friday 8:00am - 4:30pm Pacific Time
Fax-On-Demand 805-526-9540
Web Site: www.crimestopper.com
E-mail: tech-support@crimestopper.com
E-mail: tech-support@crimestopper.com
CRIMESTOPPER SECURITY PRODUCTS, INC.
1770 S. TAPO STREET, SIMI VALLEY, CA. 93063
1770 S. TAPO STREET, SIMI VALLEY, CA. 93063
This device complies with FCC Rules part 15. Operation is
subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must
accept any interference that may be received, including
interference that may cause undesired operation. The
manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this
equipment. Such modification could void the user’s authority
to use the e
subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) This device must
accept any interference that may be received, including
interference that may cause undesired operation. The
manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this
equipment. Such modification could void the user’s authority
to use the e
quipment.