Concord Camera 6340z 用户手册

下载
页码 43
10
ABOUT CAMERA MEMORY AND STORAGE
Internal Memory
The digital camera is equipped with a 16 MB internal memory. If no SD card is inserted in the camera, all 
pictures/video clips recorded by the camera will be stored in the internal memory. 
SD Memory Card
When SD card is inserted in the camera, all pictures and video clips recorded by the camera will be stored on 
the SD card by using the Design Rule for Camera File System (DCF) protocol. The DCF protocol is designed 
to accommodate file and data exchange between digital cameras and other devices. Photos that are taken by 
a DCF camera can be viewed on DCF-compatible cameras from other manufacturers.
FORMATTING INTERNAL OR SD CARD MEMORY
When you wish to delete all the files in the internal memory or on your SD card, or when you newly brought 
an SD card, format it by following steps below:
1.  Insert the SD card if it is to format SD card.
2.  Turn on the camera.
3.  Press the MENU button.
4.  Press the     button to select the Setup Menu.
5.  Press the  
  or  
  button to select Format then press the OK 
button.
6.  Press the OK button again to confirm the selection. The formatting 
progress bar will appear on the LCD.
7.  Press the MENU button to close the menu window.
Note:
1.  Formatting will erases all the data in the internal memory or on the SD card, including protected files. 
Please check the contents in the memory before formatting it.
2.  SD cards formatted in another camera, computer or peripheral device may not operate correctly. When 
that happens, reformat the SD card with this camera.
TURNING THE CAMERA ON / OFF
Power On
Slide the Power Switch to the right side and hold it until the green 
status LED lights up. It takes 
about 2 seconds to power on the camera.
•  When the camera is turned on, the lens barrel will extend out 
automatically. Do not block the 
lens barrel.
Note: 
1.  You may also press and hold the 
 button for more than 1 second to turn the camera on in Review 
mode to review the stored picture or video clips. 
2.  If the camera cannot be powered on, the batteries may be drained. Recharge the battery and try again.
PREPARING THE CAMERA
Status LED (green)
6340z UG-ENU (516084-00).indd   10
6340z UG-ENU (516084-00).indd   10
10/20/04   5:32:56 PM
10/20/04   5:32:56 PM