Concord Camera 3045 用户手册

— 41 —

Troubleshooting

Power does not turn on.

The camera does not take 

pictures.

Image is not recorded when the 

shutter button is pressed.

The flash doesn't fire.

Images are blurry or out of 

focus.

Images are not displayed on the 

LCD screen.

Recorded images are not saved 

in memory.

Cannot transfer images to a 

computer after connecting the 

USB cable.

Images do not appear on the 

television.

Error message on LCD after a 

memory card has been inserted 

into the camera:

Format Fail

Delete All?(OK)

- the mode dial is set to 

Playback mode

- the flash is charging
- memory is full
- SD card is not formatted 

correctly

- the mode dial is set to 

Playback mode

- the flash is charging
- memory is full

- the camera was moving when 

the image was captured

- the subject was beyond the 

range within which the camera 

can focus

- a memory card with non-DCIF 

images (recorded with another 

camera) is loaded

- the camera was turned 

off/powered down before the 

image was stored in memory

- USB driver is not installed

- the cable is not connected 

securely

- the video system setting is 

incorrect

- The camera supports the FAT 

file system. Occasionally 

memory cards are formatted 

with a file system that the 

camera does not support e.g. 

NTFS and these memory 

cards need to be reformatted 

before they can be used with 

the camera.

- use the included video cable to 

connect the camera to a TV

- set the video system to the 

correct setting, NTSC or PAL

  Format the memory card using 

a computer and a memory 

card reader/writer. Be sure to 

select FAT as the file system 

when formatting the memory 

card on computers running 

Windows 2000 Professional or 

Windows XP. Once the 

memory card has been 

formatted with the FAT file 

system, it should work in the 

camera.

- install the USB driver before 

you connect the camera to a 

computer

- turn the camera on

- if the battery low indicator 

appears on the LCD screen, 

replace the batteries 

immediately.

- this camera cannot display 

non-DCIF images

- hold the camera steady when 

shooting pictures

- turn the Macro mode on if the 

subject is at 20 cm (zoomed 

out) or 16 cm (zoomed in)

- do not use Macro mode when 

shooting distant subjects

- flash mode is set to OFF

- turn the mode dial to Auto or 

Manual mode

- wait until the flash has finished 

charging

- make space in memory by 

deleting images you don't 

want, or by downloading files 

to a computer and erasing all 

files or formatting memory

- set the flash to any mode 

except OFF

- batteries are inserted in the 

wrong direction

- batteries are dead

- the battery compartment door 

is open

- turn the mode dial to Auto, 

Manual, or Video mode

- wait for the flash to charge
- reformat the SD card

- the card may be defective, use 

a new card

- reload batteries in the correct 

direction

- replace with new batteries
- make sure the battery 

compartment door is securely 

closed

Troubleshooting