Panasonic AK-HC931BP 用户手册
10
Lens connector [LENS]
The lens cable is connected to this connector.
Front MIC1 connector [MIC1]
A microphone (optional accessory) is connected here.
The power supply for the microphone can be connected
from this connector. What kind power is to be supplied is
set using the MIC1 power selector switch.
The power supply for the microphone can be connected
from this connector. What kind power is to be supplied is
set using the MIC1 power selector switch.
VF connector [VF]
The viewfinder cable is connected to this connector.
Monitor output connector (BNC) [MONITOR OUT]
The video signals for the monitor are output from this
connector. The images to be output are selected using
the monitor output selector switch.
connector. The images to be output are selected using
the monitor output selector switch.
Rear VF connector
This D-sub connector is used for viewfinder interface.
JOG dial button
Turning the JOG dial while the menu screen is displayed
moves the cursor to the setting items. The menu settings
are established by operating this dial button.
For details on the menu operations, refer to the section
on the menu operations.
moves the cursor to the setting items. The menu settings
are established by operating this dial button.
For details on the menu operations, refer to the section
on the menu operations.
Electronic shutter selector switch [SHUTTER]
This is set to ON when the electronic shutter is to be
used. When it is set to the SEL position, the shutter
speed is switched in the preset range and the mode
is also switched. It is not effective when the CCU is
connected to the camera.
used. When it is set to the SEL position, the shutter
speed is switched in the preset range and the mode
is also switched. It is not effective when the CCU is
connected to the camera.
AWB/ABB start switch [AUTO W/B BAL]
This switch is operated when the white balance (AWB) or
black balance (ABB) is to be adjusted automatically. It is
not effective when the CCU is connected to the camera.
black balance (ABB) is to be adjusted automatically. It is
not effective when the CCU is connected to the camera.
VTR start/RET selector switch [VTR/RET]
This is used as the REC start switch of the VTR and
return image selector switch. It performs the same
operations as the VTR button of the lens. Its function can
be allocated as desired on the menu.
return image selector switch. It performs the same
operations as the VTR button of the lens. Its function can
be allocated as desired on the menu.
Controls and their functions