Canon A3100ISBLUE 用户手册

123

●

Displaying the Overlay

You can display gridlines for vertical and horizontal guidance, or a 3:2 guide 
to confirm the printable area for postcard size prints.

●

Choose [Disp. Overlay], then press the 

qr 

buttons to choose an option.

●

Changing the IS-Mode Settings

●

Choose [IS Mode], then press the 

qr 

buttons to choose an option.

Grid Lines

A grid overlays the display.

3:2 Guide

Gray bars will appear on the top 
and bottom of the display. This 
area will not print when printing 
on paper with a 3:2 aspect ratio.

Both

Both grid lines, and the 3:2 
guide will display.

•

In 

 mode, you cannot set [3:2 Guide] or [Both].

•

Grid Lines will not be recorded on the image.

•

The gray areas displayed with [3:2 Guide] are the areas that will not be 
printed. The actual image recorded will include the portion in the gray 
areas.

Continuous

Image stabilization is always on. 
You can confirm the result 
directly on the display, which 
makes it easier to check the 
composition or focus.

Shoot Only

Image stabilization is only active 
at the moment of shooting.

Panning

Image stabilization only counters 
up and down motion. This option 
is recommended for shooting 
objects moving horizontally.

•

If camera shake is too strong, attach the camera to a tripod. If you 
attach the camera to a tripod, you should set the IS Mode to [Off].

•

When using [Panning], hold the camera horizontally to shoot. Image 
stabilization does not work when the camera is held vertically.

CO

PY