Cisco Systems PA-MC-8TE1 用户手册
li-slot rp rate
To apply the user specified Packets Per Second (PPS) value when an Lawful Intercept (LI) is provisioned in
RP mode, use the li-slot rp rate command in global configuration mode. To disable the user specified value,
use the no form of this command .
RP mode, use the li-slot rp rate command in global configuration mode. To disable the user specified value,
use the no form of this command .
li-slot rp rate pps
Syntax Description
Packets per second (pps). The range is from 10 to
8500 for SUP720, 10 to 6000 for SUP32, and 10 to
12000 for RSP720.
8500 for SUP720, 10 to 6000 for SUP32, and 10 to
12000 for RSP720.
pps
Command Default
No default behavior or values.
Command Modes
Global configuration (config)
Command History
Modification
Release
This command was introduced on the Cisco 7600 series routers.
15.0(1)S5
Examples
This example shows how to apply PPS value when an LI is provisioned in RP mode:
router#
configure terminal
router(config)#
li-slot rp rate 5000
Related Commands
Description
Command
Displays information about the configured rate
limiters.
limiters.
show mls rate-limit
Cisco IOS Interface and Hardware Component Command Reference
58
l2 vfi manual through loopback PA-MC-8TE1 + port adapter
li-slot rp rate