Cisco Systems PA-MC-8TE1 用户手册
logging-events
to print typical T3 controller Up and Down messages on a Channelized T3 Port Adapter,use the
logging-eventscommandin T3 controller configuration
mode.UsethenoformofthiscommandtodisableprintingoftheT3controllerUpandDownmessages.
logging-eventscommandin T3 controller configuration
mode.UsethenoformofthiscommandtodisableprintingoftheT3controllerUpandDownmessages.
logging-events [detail]
[no] logging-events
Syntax Description
(Optional) Enables printing the reason code when a
T3 controller changes from the Up to Down state.
T3 controller changes from the Up to Down state.
detail
Command Default
The logging-eventscommandisthedefault.
Command Modes
T3 controller configuration
Command History
Modification
Release
This command was introduced.
12.2(19c)
Usage Guidelines
When the no logging-events command disables printing of the T3 controller Up and Down messages,
these messages will neither appear on the console nor in the logs.
these messages will neither appear on the console nor in the logs.
Examples
The following example uses the logging-events [detail] command to show the Out-of-Frame (OOF) reason
code when the T3 controller changes from an Up state to a Down state:
code when the T3 controller changes from an Up state to a Down state:
Router(config-controller)# logging-events detail
*Jun 19 17:47:50: %CONTROLLER-5-DOWNDETAIL: Controller T3 4/1, changed state to down due
to OOF
*Jun 19 17:47:50: %CONTROLLER-5-DOWNDETAIL: Controller T3 4/1, changed state to down due
to OOF
Related Commands
Description
Command
Prints the typical T1 controller Up and Down
messages on a channelized T3 port adapter.
messages on a channelized T3 port adapter.
t1 logging-events
Cisco IOS Interface and Hardware Component Command Reference
77
l2 vfi manual through loopback PA-MC-8TE1 + port adapter
logging-events