Roland RS 232C 用户手册
r
AR-3000 RS-232C Reference
-
23
System Settings
= BR (Baud Rate)
Function: Communication speed setting
Syntax:
Syntax:
stxBR: * , * ;
a b
a Card in slot
0 Card in slot A
1 Card in slot B
1 Card in slot B
b Baud rate
0 (4800)
1 (9600)
2 (19200)
3 (38400)
1 (9600)
2 (19200)
3 (38400)
Note:
Even if you use this command to specify the communication speed of the card, that of
the AR-3000 will not be changed. It can be changed by turning on again or by setting
from the front panel of the AR-3000 itself.
the AR-3000 will not be changed. It can be changed by turning on again or by setting
from the front panel of the AR-3000 itself.
= CE (Count play sEt up)
Function: Program (Count) Playback setting
Syntax:
Syntax:
stxCE: * , * , **** , **** , .... , **** ;
a b
c
c
....
c
a Card in slot
0 Card in slot A
1 Card in slot B
1 Card in slot B
b Program Playback pattern( 1 - 5 )
c Phrase number to be played back (up to 100 phrases)
c Phrase number to be played back (up to 100 phrases)
Example) CE:0,1,A1,A2,A3,A4,A5;
This registers A0001,A0002,A0003,A0004,and A0005 into the Program Playback
pattern 1 of card A.
pattern 1 of card A.
= DC (Display Contrast)
Function: Display contrast setting
Syntax:
Syntax:
stxDC: *** ;
a
a Display contrast ( -10 - +10)