RayTek 54301 用户手册
Operation
6.3 Setting the Output Jumper
In addition to the set mode in the
unit, see section 6.2
unit, see section 6.2
Modes
on page 35, the unit’s
outputs must be configured by
switching the <Output> jumper
in accordance to the requested
output function (mA, mV, TC).
E.g. for the “4 to 20 mA” output,
the <Output> jumper must be set
to the bottom position labeled
with “mA”.
switching the <Output> jumper
in accordance to the requested
output function (mA, mV, TC).
E.g. for the “4 to 20 mA” output,
the <Output> jumper must be set
to the bottom position labeled
with “mA”.
MID
37