Konica Minolta VIVID 700 用户手册

52

File
Menu

File – Import – Digitizer – One Scan (When VIVID 910 is Selected)

A scan will start, and a color image will be 
displayed in the Work window area.

If [Use Color] is not checked (i.e. no check mark is 
shown), the scan data has no color image data, and a gray-
scale image will be displayed instead of a color image.

•  Clicking on the following radio buttons will 

make a change to the image displayed in the work 
window. The data acquired during the scan will 
remain unchanged.

Item

Explanation

[Mono] radio 
button

The current image is displayed in 
monochrome.

[Color] radio 
button

The color image acquired from 
the scan is displayed.

[Pitch] radio 
button

The distance data is displayed 

in the color that is shown in the 

Near-Far color slide bar ac-

cording to the distance from the 

object to the digitizer.

•  Clicking the [Color Read] button will re-scan for 

the color data only. The distance data will not be 
updated.

•  Clicking the [Edit] button enables you to delete 

the area that is not necessary for three-dimen-
sionalization by specifying it using the mouse. 
Messages will appear at the bottom of the Work 
window area as shown right, so follow them to 
operate the mouse.

   Check the [Edit] button again to exit the edit mode.

•  Switch to pitch display screen, and right-click on 

desired position in the screen while holding down 
[CTRL] key. The Z-axis coordinates at that posi-
tion (distance from VIVID 9i) will appear.

   To specify distance manually and perform mea-

surement, this value must be used.