National Instruments 370578B-01 用户手册

© National Instruments Corporation

This manual contains instructions on how to install and configure the 
NI-FBUS software with an HSE Linking Device. The HSE Linking Device 
is an HSE device used to attach H1 links to the High Speed Ethernet.

The NI-FBUS software is intended for use with Windows 2000/NT/XP 
because Windows 9x is less robust than Windows 2000/NT/XP. This 
manual assumes that you are already familiar with your Windows operating 
system.

Refer to the Foundation Fieldbus Overview to learn the basics of Fieldbus. 
The Foundation Fieldbus Overview also includes tutorials to lead you 
through developing a simple Fieldbus application.

Refer to this getting started manual to install and configure the NI-FBUS 
software with your HSE linking device. 

If you are using the National Instruments FBUS-HSE/H1 Linking Device 
as your HSE linking device, refer to the Installation Guide: FBUS-HSE/H1 
LD Fieldbus Network Module Linking Device and the FBUS-HSE/H1 
Linking Device (LD) User Manual to install the HSE linking device.

If you are using an HSE linking device from a third-party vendor, refer to 
the installation guide or user manual provided from the vendor to install 
your HSE linking device.

If you are using the NI-FBUS Configurator, refer to the NI-FBUS 
Configurator User Manual to install and use the NI-FBUS Configurator 
software.

If you are using the NI-FBUS Communications Manager Application 
Programmer Interface (API), refer to the NI-FBUS Communications 
Manager User Manual to learn how to use the NI-FBUS Communications 
Manager API for your application. Refer to the NI-FBUS Communications 
Manager Function Reference Manual to look up specific information about 
NI-FBUS Communications Manager functions, such as syntax and error 
messages.