Link electronic 1167 产品宣传页

下载
页码 2
1000 SERIES DIGIFLEX
SMPTE  259M
Mounting Frame Options
1000    -  Single Power Supply, Holds 5 Modules
1000/2 -  Dual Power Supply, Holds 5 Modules
7200    -  Mounting Frame, Holds 1 Module
                    
            
         
 
LINK ELECTRONICS, INC.
NTSC/PAL COMPONENT ANALOG TO SDI CONVERTER
DigiFlex 1166/1167
FEATURES
‹
 10 BIT A to D                           
‹
 Analog Component to Digital
‹
 YUV or RGB Input
‹
 6 Digital Outputs
‹
 525/625
‹
 Full CCIR-601
The LINK 1166 analog YUV to digital converter
provides an accurate means of converting analog
component video to component serial digital
(SMPTE 259M). The 1167 converts RGB to SDI.
The 1166/67 takes advantage of the latest
integrated circuit technology to offer outstanding
performance.
The three 10-bit analog to digital converters feature
2x over-sampling.  Pre-filtering to full CCIR-601
specifications is handled by a high-performance
analog filter followed by a decimating digital filter.
The analog front-end features gain, offset, and
frequency compensation.
Both 525/60 and 625/50 standards are supported,
by onboard jumper selection.
All set-up adjustments are located on the front
edge of the module. The rear cell, model 1066 is
supplied with the 1166 converter. Rear cell 1067 is
supplied with the 1167. 
The DigiFlex 1166/67 is designed to reside in
LINK's 1000-Series frame. This frame can house
up to 10 modules of various types of modules with
dual power supplies. Digital, analog, video and
audio can be mixed in any combination to achieve
system flexibility.
A complete line of digital and analog products are
available for the DigiFlex 1000 series frame.. The
1000 frame can be supplied +12 VDC externally to
either power supply location. A ten-year warranty
applies to all Link products.
LINK
 ELECTRONICS, INC.  
‹
   2137 Rust Avenue   
‹
  Cape Girardeau, MO 63703-7668
 Phone 573 334 4433    
‹
     FAX  573 334 9255
MADE IN THE USA