Motorola M-Series 用户手册

 

 The Desktop Charger is optional and

may not be included in your package.

1. Connect Desktop Charger and Charger 

Adapter. Fig. H

2. Charge the battery while inside the radio by 

placing the radio in the Desktop Charger 
with radio facing towards you. 

You can also charge the battery by remov-
ing battery from radio and placing it in 
Desktop Charger. Silver contacts must 
face down and arrow points toward front 
of charger. Fig. H

3. The light on top of the Desktop Charger will 

glow continuously when radio / battery is 
inserted. If light does not come on, check 
radio / battery is properly inserted and 
check battery/ charger contacts to be sure 
they are clean. The light will continue to 
glow until the radio / battery is removed 
from Desktop Charger.

4. Allow 10 hours for the battery to fully 

charge.

 

 

1. Turn the radio off.

2. Lift accessory cover and plug the Charger 

Adapter firmly into the small jack (lower 
hole). Fig. G

3. Plug the charger into an electric outlet. The 

light on the charger will glow continuously 
if charging properly.

4. Allow 10 hours for the battery to fully 

charge.

 

• For optimum battery life, the battery 

should not be left charging for prolonged 
periods after reaching full charge. Charg-
ing the battery over the weekend is 
acceptable.

• Do not transmit while radio is charging. 

Transmitting while radio is charging can 
cause the radio transmitter or the charger 
to operate improperly.

• Turn radio off when charging. If radio is 

on while charging, at least twice as much 
time is required to charge the battery.