RCA ANT1750F 用户手册

English

a metal surface may interfere with reception. If the antenna isn’t performing as well as 
expected, try moving it away from the component or placing it on another surface. Then, 
re-scan for channels on your TV or converter box.

After locating the optimal position for your antenna, choose from one of three options:

•   Lay the ANT1750F fl at  The ANT1750F has raised feet on its bottom to prevent 

scratching of furniture.  Make sure you place the antenna on a fl at, level surface. 

 

•   Hang the ANT1750F  The back of the ANT1750F antenna has two mounting holes 

that can be used for hanging. Place both holes over screws inserted in your wall. A higher 
placement may deliver better performance.

•   Stand the ANT1750F upright  The ANT1750F comes with a removable stand. 

Simply place the antenna in the stand to prop the antenna in an upright position.

You can use the ANT1750F with or without its amplifi er, depending on which connection 
gives you the best signal. Try using the amplifi er fi rst. If you notice that you’ve lost channels 
that you normally receive, try connecting without the amplifi er.
You can connect the ANT1750F directly to your TV or use it with a converter box.

1. Make sure your TV is turned off.
2. Connect the ANT1750F’s built-in cable 

to the input jack of the amplifi er.

3. Connect the amplifi er’s built-in cable to 

the antenna input on your TV.

4. Plug the amplifi er’s power cord into an 

electrical outlet.

5. Re-scan for channels on your TV.

Built-In

Coaxial Cable

Amplifier

Insert

ANTENNA

TV/STB