Draper Large Electrically Operated Projection Screen 产品宣传页

Eyebolts for hoisting screen

(do not lift screen by center of case).

Case support brackets.

Knockouts for electrical connections

(two per end) with plastic plugs*

*Left hand motor location only on Paragon

1

/

2

" threaded 

rod (for suspending

screen) by others.

3

/

8

" -16 threaded rod

(use for adjusting 

deflection in extremely 

long units) by others.

8"

13

1

/

4

"

12"

  Matt White
  Glass Beaded

   Extra Screen Drop (Total screen height cannot exceed 24')

  Same color as viewing surface (standard on AV format screens)
 Black  (standard on all other formats)

 

Length of total drop  

 

 

   Black Masking Borders (Optional on AV format, standard on all others)
   Wall Mount Bracket Kit (Includes two brackets)
   Endcap Ceiling Tile Flange Kit (2 per kit)
   Ceiling Tile Flange for front and/or rear of case (12' lengths)

 

How many 12' lengths do you need? 

 

   Total number of 110-120V AC switches (switches operate independently)

  Substitute white switch(es) for silver wall plate with black rocker
  Serial or Network Communication (Complete Serial & Network Control Planning Sheet)
  Optional Low Voltage Control Module (LVC-III)

   24 Volt 3-Button Switch           

Number of 24V switches: 

   Radio Frequency Remote Control (only with 24v)
   Infrared Remote Control (only with 24v) 

   Optional Key Operated Switch

   Power Supply Key Switch (On-off)
   3-Position Key Control
   3-Position Switch with Hinged Key-Locking Coverplate

   Optional Video Interface Control 

  VIC-115 

  Override Switch

  VIC-12 

  Override Switch

  VIC-6 

  Override Switch

Copyright © 2008 Draper Inc.  Form Paragon_Sub08-R 

Printed in U.S.A.

PROJECT:

ARCHITECT:

CONTRACTOR:

SUPPLIER:

DATE: 

 REVISED: 

  projection screens, size 

  h. x 

  w., 

electrically operated 110-120v AC 60 Hz. 3-wire motor mounted inside 
screen roller, 2.5 amp draw, instantly reversible, lifetime lubricated, 
with internal thermal overload protector and mechanical brake. Motor 
mounted with sound-absorbing fi xtures. Left hand motor location only. 
Preset, accessible limit switches. J-box inside case accessible via 22 
ga. steel cover plate. Entire roller and drive assembly easily removable 
through bottom of case. 
Roller to be 6" OD x 

1

/

8

" wall steel tube. Roller brackets to be painted 

white and to have double row radial ball bearings. Viewing surface to 
be ([GREENGUARD for Children and Schools certifi ed Matt White] 
[Glass Beaded]), fl ame and mildew resistant. Matt White and High 
Contrast Grey viewing surfaces shall qualify as low emitting and 
meet all of the requirements of the GREENGUARD for Children and 
Schools and GREENGUARD certifi cation program, which are: emissions of total volatile 
organic compounds < 0.22 mg/m

3

, formaldehyde < 0.0135 ppm, total aldehydes < 0.043 

ppm, individual volatile organic compounds < 1/1000 TLV and < ½ chronic REL and 
total phthalates < 0.01 mg/m

3

. Dowel shall be 1½" OD steel tube with black polyethylene 

endcaps.
Case constructed of extruded aluminum. Bottom of case fully enclosed except for slot 
allowing fabric passage. Bottom closure panel shall be extruded aluminum, fi nished white, 
and may be removed manually for access to roller and drive unit. Closure panel shall be 
held in place by screw and bracket at each end of case. Aluminum endplates with integrated 
steel brackets for suspended mounting shall be fastened to extruded case with thread-
cutting screws. Eyebolts shall be provided for use in hoisting screen. Case support brackets 
shall be welded steel channel, riveted to exterior of case. 
Three-position control switch (or switches—specify number) shall stop or reverse screen at 
any point. Controls to be furnished complete with cover plate.
Entire unit certifi ed by Underwriters' Laboratories, Inc. for the U.S. and Canada. Suitable 
for use in environmental air space in accordance with Section 300-22 (c) of the National 
Electrical Code, and Sections 2-128, 12-010 (3) and 12-100 of the Canadian Electrical 
Code, Part 1, CSA C22.1. U.S. Patent No. 6,873,461.

Wall Mount Bracket Kit: Kit includes two structural steel brackets and hardware to attach 
brackets to case. Hardware for mounting to wall structure by others.
Endcap Ceiling Tile Flange Kit: Extruded aluminum, fi nished white. Attaches to endcaps. 
Each kit contains two (2) fl ange pieces and hardware for attaching trim fl anges to endcaps.
Ceiling Tile Flange for Front of Case: Each kit includes 12' extruded aluminum, fi nished 
white. Attaches to front of case. Hardware for attachment to case included.
Downloadable 3-part specifi cations are available at www.draperinc.com.

®

AV Format 
 

15' x 20' 

 

 

250" 

440 

 

20' x 20' 

 

 

250" 

450

 

11' x 22' 

 

 

274" 

484

  16½' x 22' 

 

 

274" 

494

 

22' x 22' 

 

 

274" 

504

 

12' x 24' 

 

 

298" 

528

 

18' x 24' 

 

 

298" 

538

 

24' x 24' 

 

 

298" 

548

 

13' x 26' 

 

 

322" 

572

  19½' x 26' 

 

 

322" 

582

 

14' x 28' 

 

 

346" 

616

 

21' x 28' 

 

 

346" 

626

4:3 NTSC Video Format
 

25' 

177" x 236" 

182" x 240" 

250" 

440

 

27½' 

194" x 260" 

199" x 264" 

274" 

484

 

30' 

212" x 284" 

217" x 288" 

298" 

528

 

32½' 

230" x 308" 

235" x 312" 

322" 

572

 

35' 

248" x 332" 

253" x 336" 

346" 

616

16:9 HDTV Video Format
 

270" 

133" x 236" 

138" x 240" 

250" 

440

 

300" 

146" x 260" 

151" x 264" 

274" 

484

 

324" 

160" x 284" 

165" x 288" 

298" 

528

 

354" 

173" x 308" 

178" x 312" 

322" 

572

 

384" 

187" x 332" 

192" x 336" 

346" 

616

Case Dimensions 13¼" high x 12" deep. Optional wall mounting brackets extend 
1¾" beyond each end of case (hole centers are 1" from end of case).