Datalogic Scanning Memor 用户手册
CONNECTIONS
2
2 CONNECTIONS
2.1 USB
CONNECTION
You can use any standard mini USB cable to directly connect the Datalogic
Memor™ to a host computer to transfer data through the USB interface.
A
C
B
Key:
A) Host Computer
C) Datalogic Memor™
B) Standard Mini USB cable
The Single Cradle can be connected to the Host by any standard mini USB
cable to transfer data through the USB interface.
A
C
B
D*
Key:
A) Host
Computer
C) Single
Cradle
B) Standard Mini USB cable
D) *Power Supply (only necessary
for battery charging)
In this case the power supply is only necessary for battery charging. Insert the
power supply plug into the power jack on the base of the cradle and attach the
power supply to a power outlet.
NOTE
If using the Datalogic Memor™ Single Ethernet Cradle, be sure
that the switch is in the “USB” position.
During switch operation from USB position to Ethernet position
and vice versa the mobile computer must not be inserted in the
cradle.
that the switch is in the “USB” position.
During switch operation from USB position to Ethernet position
and vice versa the mobile computer must not be inserted in the
cradle.
5