iogear GCL1916 用户手册
GCL1908 / GCL1916 User
Manual
Manual
24
Port ID Numbering
Each port on a GCL1908 / GCL1916 installation is assigned a unique Port ID.
You can directly access any computer on any level of the installation by
specifying the Port ID that the computer is connected to – either with the
OSD (see OSD Operation, page 25), or with the Hotkey port selection
method (see Keyboard Port Operation, page 37).
You can directly access any computer on any level of the installation by
specifying the Port ID that the computer is connected to – either with the
OSD (see OSD Operation, page 25), or with the Hotkey port selection
method (see Keyboard Port Operation, page 37).
A computer attached to a master unit has a two digit Port ID (from 01–08
for the GCL1908; from 01–16 for the GCL1916), that corresponds to the
KVM port number that it is connected to.
KVM port number that it is connected to.
A computer attached to a slave unit has a four digit Port ID.
The first two digits represent the KVM port number on the master and the
second two digits represent the KVM port number on the slave unit that
the computer is connected to. For example, a Port ID of 02–16 would refer
to a computer that is connected to KVM port 16 of a slave unit that links
back to KVM port 2 of the master unit.
second two digits represent the KVM port number on the slave unit that
the computer is connected to. For example, a Port ID of 02–16 would refer
to a computer that is connected to KVM port 16 of a slave unit that links
back to KVM port 2 of the master unit.