iogear GCL1916 用户手册
GCL1908 / GCL1916 User
Manual
Manual
30
(Continued from previous page.)
Setting
Function
SCAN
–SKIP
MODE
Selects which computers will be accessed under skip mode (see
F5 SKP, page 34), and Auto Scan mode (see F7 SCAN, page 35.
Choices are:
F5 SKP, page 34), and Auto Scan mode (see F7 SCAN, page 35.
Choices are:
ALL - All the ports which have been set accessible (see SET
ACCESSIBLE PORTS, page 31);
ACCESSIBLE PORTS, page 31);
QUICK VIEW - Only those ports which have been set accessible
and have been selected as quick view ports (see SET QUICK
VIEW PORTS, page 33);
and have been selected as quick view ports (see SET QUICK
VIEW PORTS, page 33);
POWERED ON - Only those ports which have been set accessible
and are powered on;
and are powered on;
QUICK VIEW + POWERED ON - Only those ports which have
been set accessible and have been selected as quick view ports
and are powered on. The default is ALL.
been set accessible and have been selected as quick view ports
and are powered on. The default is ALL.
Note: The quick view choices only show up on the administrator's
screen, since only he has Quick View setting rights (see SET
QUICK VIEW PORTS, page 33, for details).
screen, since only he has Quick View setting rights (see SET
QUICK VIEW PORTS, page 33, for details).
SCREEN
BLANKER
BLANKER
If there is no input from the console for the amount of time set with
this function, the screen is blanked. Key in a value from 1
this function, the screen is blanked. Key in a value from 1
–30
minutes, then press [Enter]. The default setting of 0 disables this
function.
function.
HOTKEY
COMMAND
MODE
COMMAND
MODE
Enables / disables the hotkey command function in case a conflict
with programs running on the computers occurs.
with programs running on the computers occurs.
HOTKEY
Sets the keyboard shortcut for invoking Hotkey Mode (see
page 37). Choices are: NUM LOCK + - (minus) (default), and
CTRL + F12.
page 37). Choices are: NUM LOCK + - (minus) (default), and
CTRL + F12.
OSD
LANGUAGE
LANGUAGE
Sets the language used in the OSD. Choices are: English (default),
German, Japanese, Simplified Chinese and Traditional Chinese.
German, Japanese, Simplified Chinese and Traditional Chinese.