Panasonic KX-TG7103NE 用户手册
Preparation
8
Base unit
A Charge contact
B {x} (Page)
C Ringer
B {x} (Page)
C Ringer
Displays
Display icons
Connections
Base unit
When connecting the AC adaptor to the base
unit, a short beep will be heard. If it is not heard,
check the connections.
When connecting the AC adaptor to the base
unit, a short beep will be heard. If it is not heard,
check the connections.
Charger (KX-TG7102 and KX-TG7103 only)
Connect the AC adaptor to the charger and route
the cable as shown. The charger can be mounted
on the wall, if required.
Connect the AC adaptor to the charger and route
the cable as shown. The charger can be mounted
on the wall, if required.
Bemærk:
L
L
When connecting the telephone line cord to the
telephone network, use the included telephone
telephone network, use the included telephone
Display
icon
icon
Meaning
w
Within range of a base unit
L
L
When flashing: Handset is
searching for base unit. (out
of range of base unit,
handset is not registered to
base unit, no power on base
unit)
searching for base unit. (out
of range of base unit,
handset is not registered to
base unit, no power on base
unit)
L
Handset is accessing base
unit. (intercom, paging,
changing base unit settings,
etc.)
unit. (intercom, paging,
changing base unit settings,
etc.)
k
Handset is on an outside call.
5
Battery strength
[2]
Handset number (Standby
display setting, side 15)
display setting, side 15)
0
New voice mail message
received (side 19) (for Danish
and Swedish users only)
Line is being used by another
handset.
received (side 19) (for Danish
and Swedish users only)
Line is being used by another
handset.
A
B
C
Use only the included AC
adaptor and telephone line
cord.
adaptor and telephone line
cord.
(220–240 V, 50 Hz)
To telephone
network
network
Hook
(220–240 V,
50 Hz)
50 Hz)
Screws
25 mm
Hooks
Use only the included AC adaptor.
TG7100-7102-7103NE(e-da).book Page 8 Wednesday, April 19, 2006 1:09 PM