DISH Network 612 用户手册

You can find out what device code you’ve set for each remote control mode (TV, VCR, 
and AUX)

.       

5

Press the UP or DOWN ARROW 
repeatedly until the device turns off.

As you press the UP or DOWN ARROW, the 
remote tries each code in the memory to see if 
it can turn off your device. When the device 
turns off, you have found a code that might 
work.
Note: The mode button for the device will flash 
rapidly eight times when you’ve scanned all the 
codes for that device.

6

Press POUND (#).

The mode button flashes three times if you 
have entered the code correctly. This stores 
the code you found.

7

Turn the device back on and try some 
other buttons to make sure they 
work.

Try some other buttons to make sure they 
work. Sometimes POWER works when other 
buttons don’t. If using Limited Mode, try 
VOLUME or MUTE.

8

If necessary, repeat this procedure 
until you’ve tried all the codes.

You may need to repeat the scan to find the 
best code for your device.

1

Press and hold the appropriate mode 
button until all the other mode buttons 
light up, and then let go of the button. 
The mode button flashes.

For example, hold TV for a TV until all of the 
other mode buttons light. When you let go, TV 
will flash.