Sony RDR-GX7 用户手册
29
Timer Recording
Rec
o
rding/Timer Rec
o
rding
Recording TV programmes using the
VIDEO Plus+ system
VIDEO Plus+ system
The VIDEO Plus+ system is a feature that simplifies setting
timer recordings. Just enter the PlusCode number listed in the
TV programme guide. The date, time, and programme position
of that programme are set automatically.
Check that the channel is correctly set in “Channel Setting” in
“Settings” (page 75).
timer recordings. Just enter the PlusCode number listed in the
TV programme guide. The date, time, and programme position
of that programme are set automatically.
Check that the channel is correctly set in “Channel Setting” in
“Settings” (page 75).
a Press }/1.
b Turn on the TV, and switch the input selector
on your TV so that the signal from the
recorder appears on the TV screen.
recorder appears on the TV screen.
◆ When using an amplifier (receiver)
Turn on the amplifier (receiver) and select the
appropriate channel so that you can hear sound from
the recorder.
Turn on the amplifier (receiver) and select the
appropriate channel so that you can hear sound from
the recorder.
c Press Z, and place a recordable disc on the
disc tray.
d Press Z to close the disc tray.
Wait until “LOAD” disappears from the front panel
display.
If you use an unused DVD, formatting starts
automatically.
When using an unused DVD-RW, select the
recording format, VR or Video.
display.
If you use an unused DVD, formatting starts
automatically.
When using an unused DVD-RW, select the
recording format, VR or Video.
e Press [TIMER].
The Timer programming (VIDEO Plus+) menu
appears.
appears.
If the Timer programming (Standard) menu appears,
press
press
< to switch the display.
f Press the number buttons to enter the
PlusCode number, then press SET.
◆ If you make a mistake
Press CLEAR and re-enter the correct number.
Press CLEAR and re-enter the correct number.
◆ To cancel the setting
Press
Press
M/m to select “Cancel,” then press ENTER.
g Press M/m to select “OK,” then press
ENTER.
The date, start and stop times, programme position or
station name, recording mode, and PDC/VPS setting
appears. For details about the PDC/VPS function, see
page 26.
station name, recording mode, and PDC/VPS setting
appears. For details about the PDC/VPS function, see
page 26.
◆ If you want to change the setting
A Press </, to select the item you want to
change.
B Press M/m to change the setting.
To cancel the setting, select “Cancel.”
To re-enter the PlusCode number, select “Change.”
To re-enter the PlusCode number, select “Change.”
h Press </M/m/, to select “OK,” then press
ENTER.
The TIMER REC indicator lights up on the front
panel, and the recorder is ready to start recording.
panel, and the recorder is ready to start recording.
i Press RETURN to turn off the display.
To record from a decoder or other source, leave the
connected equipment turned on.
connected equipment turned on.
To stop recording during timer recording
Press x REC STOP.
If the timer settings overlap
To confirm, change, or cancel timer recording
<
/
M
/
m
/
,
,
ENTER
"
/
1
Z
[TIMER]
Number
buttons
buttons
x
REC STOP
CLEAR
SET
RETURN
Timer - VIDEO Plus+
Set the timer by entering the timer code.
Standard
PlusCode No.
Cancel
Timer - VIDEO Plus+
Is the follwing timer setting correct? To modify,
adjust each item or re-enter the timer code.
adjust each item or re-enter the timer code.
Date
Mon 28.6 10
Start
Prog.
Mode
OK
00
:
11
Stop
30
:
HQ
Off
AAB
Cancel
Change
VPS
PDC
,
continued