Honeywell IV REV B 用户手册
Included Software Setup
________________________________________________________________________________________________________
128
128
Setting up the Fusion Remote Software
Creating a New Remote Connection
1. Select Start > Programs > Fusion > Fusion Remote.
2. Click New to open the Site Info window.
3. Enter the Site Code and Site Name. The Site Code can be found on the Information
2. Click New to open the Site Info window.
3. Enter the Site Code and Site Name. The Site Code can be found on the Information
tab on the Fusion DVR.
4. Enter the IP Address of the DVR server. By default the DVR is set to connect using
DHCP.
5. Enter the Center Port. This setting is specified on the server on the Network tab
6. Click OK.
7. Click on the newly created connection and enter the username and password.
8. Click Connect.
6. Click OK.
7. Click on the newly created connection and enter the username and password.
8. Click Connect.
DVR Site List
Selected Site
Information
Import/Export saved configurations