Honeywell IV REV B 用户手册
Setup Options
________________________________________________________________________________________________________
64
64
Scheduling Sensors and Relays (By Example)
It is easy to add advanced recording functionality using Sensor Inputs and Relay
Outputs.
SENSOR
Outputs.
SENSOR
- Sensor Inputs can be programmed to instantly start one or more cameras
recording when an alarm occurs. These alarm events can also activate Relay Outputs as
desired.
RELAY OUTPUT
RELAY OUTPUT
- Relay Outputs can be set to activate when motion alarms or sensor
alarms occur.
The schedule example will be as follows:
• SUN-SAT (12AM-11:59PM) Cameras 1 and 2 will be activated on Sensor #3
and/or Sensor #5, which will then activate Relay Output #7 and #13.
• SUN-SAT (12AM-11:59PM) Camera 3 will be set to Record on MOTION.
When motion occurs it will activate Relay Output #7 and #10.
• SUN-SAT (12AM-11:59PM) Sensor #6 will activate Relay Output #8 when an
alarm occurs. This event will NOT cause any cameras to record.
To do this, a total of 3 schedules will be created.