Linksys WIP330 用户手册
Wireless-G IP Phone
65
Appendix A: Troubleshooting
Common Problems and Solutions
Common Problems and Solutions
8.
Repeat steps 5-7 until you have entered all four port ranges for the IP Phone.
9.
Check the Enable option for the port services you want to use.
10. When you have completed the configuration, click the Save Settings button.
4. The power LED does not light up.
Go through this checklist until your problem is solved:
•
•
Remove the IP Phone’s battery from its compartment. Wait five seconds while the IP Phone resets itself.
Insert the battery and power on the IP Phone.
Insert the battery and power on the IP Phone.
•
You may be using the wrong power adapter. Make sure the power adapter you are using is the one
included with the IP Phone.
included with the IP Phone.
Application
Start and End
Protocol
IP Address
Enable
Internet phone 1
5060 to 5061
UDP
(IP address of IP Phone)
X
Internet phone 2
53 to 53
UDP
(IP address of IP Phone)
X
Internet phone 3
69 to 69
UDP
(IP address of IP Phone)
X
Internet phone 4
10000 to 20000
UDP
(IP address of IP Phone)
X