Toshiba 42TL515U 用户手册

下载
页码 102
41
Chapter 6: Basic features
Using Channel Return
You can switch between two channels without entering 
a channel number each time. This feature also works for 
external inputs.
1
Select the first channel you want to view.
2
Select a second channel using the Channel Number 
buttons (and the dash (
) button if needed).
3
Each time you press 
, the TV switches back and 
forth between the last two channels that were 
tuned.
Using SurfLock
The SurfLock
 feature temporarily memorizes one 
channel to the 
 button so it can be quickly returned 
to from any other channel. This feature also works for 
external inputs.
To memorize a channel to the 
 button:
1
Tune the channel you want to program to the 
 
button.
2
Press and hold 
 for about 2 seconds until the 
message “Memorized” appears. The channel has 
been programmed to the 
 button.
3
You can then change channels repeatedly, and 
when you press 
, the memorized channel will 
be tuned.
After pressing 
 and then changing channels again, 
the memory is cleared and the button functions as 
Channel Return.
Selecting the video input to view
To select the video input to view:
1
Press 
 on the remote control or TV control 
panel.
2
Change the input: 
Press 0–8.
Repeatedly press B or b. Press 
.
Repeatedly press 
.
Note:
• You can label the video input sources according to the 
specific devices you have connected to the TV 
(
- “Labeling video inputs” on p. 32).
• You can skip sources (- “Skipping video inputs” on p. 
31).
• Inputs that are set to be skipped will not be available and 
will be skipped when selecting inputs by repeatedly 
pressing  
or 
B or b.
• You can select inputs that are set to be skipped using the 
number buttons.
• If one or more HDMI
®
 CEC devices are connected to an 
HDMI input, the icon (
) appears in the input selector. 
In this case, the label (- p. 32) will not appear in the 
input selector.
• When the Auto Input feature is set, you can select a video 
input source with the remote control by pressing and 
holding the corresponding MODE SELECT button for 2 
seconds (
p. 33).
To select an HDMI
®
 CEC device:
1
Press B or b to select an HDMI input.
2
Press c. The list of HDMI
®
 CEC devices for that 
input appears.
3
If the input has multiple HDMI
®
 CEC devices, use 
B or b to select a device.
4
Press .
-
O K
Inputs
ANT/CABLE
ANT/CABLE
0
Video 1
HDMI 2
6
HDMI 3
3
ColorStream HD1
HDMI 1
4
Video 2
7
HDMI 4
8
PC
O K