Vidikron VP-5000a 用户指南

Sub Volume (Installer Adjust mode): Select Sub Volume from the Set-Up menu to adjust 
the audio input level for the current source. Do this for all sources, as needed to prevent 
sudden, drastic changes in sound volume when switching inputs. 

For example, if a DVD player is connected to Input 4, a computer is connected to Input 1 and 
the audio output of the DVD player is fixed at a much higher level than that of the computer, 
reduce the Sub Volume for Input 4.

The Sub Volume control affects the current input only; the front-panel and remote volume 
controls are “master” controls; see Figure 4-7. 

Language: Refer to Changing the OSD Language on page 27. 

Energy Mode: Select Energy Mode from the Option menu to reduce power consumption 
and panel deterioration by limiting brightness of the screen. You can choose to limit 
brightness according to the input signal or in response to the ambient light level. 

• Select LEVEL 1 to limit brightness in accordance with the input signal. Power consumption 

is less than that used in AVERAGE mode.

• Select LEVEL 2 to limit brightness in accordance with the input signal. Power consumption 

is less than that used in LEVEL1 mode.

• Select LEVEL 3 to set the brightness at fixed level, regardless of input signal level (useful 

for preventing screen aging due to image burn).

• Select AUTO to have the PlasmaView adjust the brightness automatically in response to 

ambient lighting conditions, to optimize picture quality.

• To disable the Energy Mode feature, select MUTE. 

Time/Date: Select Time/Date from the Option menu to set the PlasmaView’s internal clock 
(time of day and day of the week) and turn the screen maintenance feature on or off.

• Present Time: To set the internal clock, highlight Present Time and press SET. Then, use 

the right- or left-arrow buttons ( 

 ) to set the time. Press SET again when you are 

finished. 

• Program Timer: Set Program Timer to PROGRAM to enable the PlasmaView’s screen 

maintenance feature, which lets you replace the normal source signal with a white field, 
an inverse image or an “orbiting” image. This occurs according to the schedule you 
establish using the Screen Maint. menu in Installer Adjust mode (refer to Screen Maint. on 
page 43). 

Select Return to exit the Time/Date menu. 

1  AUDIO INPUT

   (INPUT1)

2  AUDIO INPUT
    (INPUT2)

3  AUDIO INPUT
    (INPUT3) 

4  AUDIO INPUT
    (INPUT4) 

5  AUDIO INPUT
    (INPUT5) 

INPUT1
SUB VOLUME

INPUT2
SUB VOLUME

INPUT3
SUB VOLUME

INPUT4
SUB VOLUME

INPUT5
SUB VOLUME

INPUT
SELECTOR

POWER
AMPLIFIER

VOLUME