Toshiba 24V4210U 用户手册

117

❖

If the current input is ANT/CABLE or VIDEO, the menu will 
display the text “CableClear”. The available selections are Off, 
Low, Middle, and High.

❖

If the current input is ColorStream

®

 HD, HDMI 1 or HDMI 2, the 

menu will display the text “DNR”. The available selections are 
Off, Low, Middle, and High. Low, Middle, and High will reduce 
the noise in varying degrees, from lowest to highest, 
respectively.

To save your new settings, highlight Done, and then press the 
OK button. 

To revert to your original settings, highlight Reset, and then 
press the OK button. 

The MPEG Noise Reduction feature allows you to reduce visible 
interference caused by MPEG compression. Choices for MPEG 
Noise Reduction are Off, Low, Middle, and High. Off is 
automatically selected when this feature is disabled (“grayed out”).

To select the MPEG Noise Reduction level:

Press the MENU button to open the Picture menu.

Highlight Noise Reduction, and then press the OK button.

Press the ( /  arrow) buttons to highlight the MPEG Noise 
Reduction field G Drive, and then press the ( /   arrow) 
buttons to select either Off, Low, Middle, or High.

To save your new settings, highlight Done, and then press the 
OK button.

To revert to your original settings, highlight Reset, and then 
press the OK button. 

You can use the Game Mode feature for shorter frame delays when 
playing a video game requiring split-second timing between the 
on-screen display and input from the controller (such as music 
creation and high-action games).

This feature is more effective for 480i and 1080i input signals.