Viewsonic VS12277-1G 用户手册
Place the TV on a solid surface
1.
Ensure that the TV is placed in a position to allow free flow of air. Do not cover the
ventilation openings on the back cover.
ventilation openings on the back cover.
2.
Leave at least 15cm around the TV set. Otherwise, air-circulation may be inadequate and
cause overheating, which may cause a fire or damage to the TV set.
cause overheating, which may cause a fire or damage to the TV set.
3.
Never place the TV set in hot, oily humid or excessively dusty places.
4.
To prevent any unsafe situations, no naked flame sources, such as lighted candles, should
be placed on or in the vicinity.
be placed on or in the vicinity.
5.
Avoid heat, direct sunlight and exposure to rain or water. The equipment shall not be
exposed to dripping or splashing.
exposed to dripping or splashing.
Install the wall mount plate to the LCD TV
1.
Please refer page 2
4 to understand wall mount dimension.
2.
If the TV set is to be installed on
a wall, have the installation carried out by qualified
service personnel. Improper installation may render the TV set unsafe..
3.
Mount the wall mount bracket to the wall ensuring use of proper screws to support the
installation. Ensure there is at least 6 cm of space surrounding any air-vents of your
LCD
TV to allow adequate cooling during operation.
4.
Before mounting your TV on the wall, you need to remove the base and connect all of the
input source from the rear I/O.
input source from the rear I/O.
Connecting the power
1.
This TV set is designed to operate on a 220–240V AC supply only. Take care not to
connect too many appliances to the same mains socket as this could result in fire or
electric shock.
connect too many appliances to the same mains socket as this could result in fire or
electric shock.
2.
Do not use a poor fitting mains socket. Insert the plug fully into the mains socket. A poor fit
may cause arcing and result in a fire. Contact your electrician to have the mains socket
changed.
may cause arcing and result in a fire. Contact your electrician to have the mains socket
changed.
3.
The TV set is not disconnected from the mains when the TV set is switched off. To
disconnect the TV set completely, pull the plug from the mains. However, some TV sets
may have features which need the TV set to be left in standby to work correctly. The
instructions in this manual will inform you if this applies.
disconnect the TV set completely, pull the plug from the mains. However, some TV sets
may have features which need the TV set to be left in standby to work correctly. The
instructions in this manual will inform you if this applies.
4.
If you will not be using the TV set for several days, the TV set should be disconnected from
the mains for environmental and safety reasons.
the mains for environmental and safety reasons.
ViewSonic N3290w/N4290p/N4790p
6
ENGLISH