Vidikron VL-37 用户手册

Save Settings (not available for RGB input): The DView lets you save image quality 
settings for each input and supported resolution to a preset. You can recall this preset at a 
later time by simply pressing a button on the remote control or using the Restore Settings 
menu command (see below).

You should save changes to any of the following settings to a preset; otherwise they will be 
lost when a new input source or resolution is selected:

• Aspect ratio

• Brightness

• Contrast

• Color saturation

• Tint

• Sharpness

• Gamma

• Color temperature and white balance

Restore Settings (not available for RGB input): To recall a preset, choose Restore Settings 
from the Picture Adjust menu and select “Custom,” “ISF Day” or “ISF Night.” Or, use the 
corresponding buttons on the remote control. 

To adjust the DView audio settings, select Audio from the Main Menu and press ENTER. 

Balance: To adjust the left/right speaker balance, select Balance from the Audio Menu and 
press ENTER. Use the left- and/or right-arrow buttons to make one channel louder than the 
other. 

Equalizer: The DView has a five-band graphic equalizer that you can use to boost or cut 
certain audio frequencies. To use it, select Equalizer from the Audio menu and press ENTER. 
Select one of four equalizer presets -- Standard (flat), Music, Film or Speech -- or select 
Custom to create your own according to taste. The five frequency bands are 100, 300, 1000, 
3000 and 10,000 Hertz (Hz).

Surround: The DView has a “surround sound” mode that simulates a multi-channel sound 
system. To use the surround mode, select Surround from the Audio menu and set it to On.