Metz 20 TM 52 用户手册

- 57 -

page 100 appears to be one greater than

page 199.

To exit Teletext

Press TV button. The screen will switch to

TV mode.

To Display the Time

While watching a TV programme with Tele-

text transmission press

button. The

current time information, captured from Tele-

text will be displayed at the upper right of the

screen until the

button pressed.

If the programme being watched does not

have Teletext transmission, no information

will be displayed.

Peripheral Equipment

Connections

There is a wide range of audio and video

equipment that can be connected to your TV.
Connection diagrams at the and of this sec-

tion show you where the different equipment

should be connected at the back side of the

TV.

Via the Euroconnector

Your TV set has 2 Euroconnector sockets. If

you want to connect peripherals (e.g. video,

decoder, etc.) which have Euroconnectors,

to your TV, use SCART - (AV1 / AV2) input.
If an external device is connected via Euro-

connector sockets TV is switched to AV

mode automatically. In this case if both

sockets are connected SCART-1 has the

precedence.

Via Ant Input

If you want to connect to your TV, peripherals

like video recorders or decoders, but the de-

vice you want to connect does not have

Euroconnector, you should connect it to the

ANT input of your TV set.
If the VCR is connected via antenna input

it is suggested to use the Programme 0.

Decoder

Cable TV offers you a wide choice of

programmes. Most of them are free, others

are to be paid for by the viewer. This means

that you will need to subscribe to the broad-

casting organisation whose programmes

you wish to receive. This organisation will

supply you a corresponding decoder unit to

allow the programmes to be unscrambled.
For further information ask your dealer. See

also the booklet supplied with your decoder.
Connect a decoder with an aerial socket

to the TV
Connect the aerial cable.
Connect a decoder without an aerial

socket to the TV
Connect the decoder to your TV with a

eurocable (RCA Jack Cable) to SCART -

(AV1 / AV2) (RCA Jack). When your decoder

has a Euroconnector / RCA Jack you can

obtain better picture quality if you connect a

eurocable (RCA Jack Cable) to SCART -

(AV1 / AV2) (RCA Jack).

TV and Video Recorder

Connect the aerial cables.
Better picture quality can be obtained if you

also connect a eurocable to SCART - (AV1 /

AV2) sockets.

Playback NTSC

Connect NTSC VCR player to one of two

Euroconnectors at the back of the TV.
Then, press AV button to select AV-1 or

AV-2.

Search for and store the test signal

of the video recorder

Unplug the aerial cable from the aerial

socket ANT of your video recorder.

Switch on your TV and put the video recorder

on the test signal. (See the handbook for

your video recorder.)

Search for the test signal of your video re-

corder in the same way as you searched for