Fujitsu P-TU5051E 用户手册

Select the video input format.

Each time 

EF

 is pressed, the setting is switched.

Press 

<

 to store.

* RGB input is not made to Video 3.

You can use this option to select the video format appropriate for the input signal.

Each time you press 

E

 or 

F

, one of the available modes appears in the following sequence:

[Auto1]: Automatically selects NTSC, PAL and SECAM.
[Auto2]: Automatically selects NTSC and M-PAL.
[Other than Auto]: You need to select a system appropriate to the input signal.

Press 

<

 to store.

Press 

C

 or 

D

 to select the items for setting. It is switched as shown as below.

Press 

<

 to proceed to the next step.

Press 

E

 or 

F

 to select the country or region, and then press 

<

.

All the channels are scanned, and only the channels that can be received are assigned to the Program Nos.

* Several minutes are required to scan all the channels. To cancel the operation in progress, press 

;

.

* See page E-47 for the selectable TV frequencies.

Press 

E

 or 

F

 to select the Program No. to be stored.

Press 

C

 or 

D

 to select the Manual Store items to be set (Setting or Name). Press 

<

 to proceed.

Press 

C

 or 

D

 to select the setting item.

Each time 

E

 or 

F

 is pressed, the TV frequency is switched.

Each time 

E

 or 

F

 is pressed, the TV SYSTEM is switched.

Input Terminal Settings Screen

Channel Settings Screen

MHD01862_E.book  40 ページ  ２００５年１１月２５日　金曜日　午後８時５４分