GE 25210 用户手册

Registration (only applicable to handset)

A cordless handset will not operate until it is registered to the base. During

the registration process, keep the handset near the base. Up to 10 cordless

handsets can be registered to one base.

NOTE: If a handset has not been registered to the base, then the screen

displays “PRESS “REG” TO INITIATE REGISTRATION” once the handset has

been activated. Press the REG soft key to start the registration.

From the Phone Setting Menu:
1. Press the

VOL (+ or -) button to scroll to Registration.

2. Press SELECT soft key and you may program the following items:

Register

From the Phone Setting Menu:
1. Press the

VOL (+ or -) button to scroll to Register.

2. Press SELECT soft key. The screen displays

“Press base unit Page button

until beep”.

3. Press and hold the

Page button on base for 5 seconds.

“Registration” displays to indicate the base is now in registration mode.

5. If the registration is successful, the screen displays “

Registration

complete” for 2 seconds and emits a confirmation tone.

6. If the registration is failed (i.e. timeout), the screen displays

“REGISTRATION FAILED!” for 2 seconds and emits an error tone.

Remove Handset

De-registration cancels registration. During the de-registration process,

keep the handset near the base.

WARNING: It is not recommended that a handset be

deregistered unless absolutely necessary because once a

handset is deregistered, that handset’s telephone features

cannot be used until the handset is re-registered.

From the Phone Setting Menu:
1. Press the

VOL (+ or -) button to scroll to the Remove handset.

2. Press SELECT soft key button. The screen displays

“Remove handset?”.

3. Press the YES soft key to confirm de-registration. The screen displays

“Saved” and then displays “Press “REG” to initiate registration” in the

handset.

NOTE: You can press the REG soft key to enter the registation mode again.

Programming the Telephone