GE 25210 用户手册

No dial tone
•   Check or repeat installation steps: 
 

Make sure the base power cord is connected to a working electrical 

outlet. Make sure the telephone line cord is connected to the base and 

the wall jack.

•   Connect another phone to the same jack. If it doesn’t work, the  

problem might be your wiring or local service.

•   The handset may be out of range of the base. Move closer to the base.
•   Make sure the battery is properly charged (for 14 hours).
Dial tone is ok, but can’t dial out
•   Make sure the type of phone service you are subscribed to is 

TONE or 

PULSE.

Handset does not ring
•   Make sure the handset ringer is set to On.
•   The handset may be out of range of the base. Move closer to the base.
•   You may have too many extension phones on your line. Try unplugging 

some extensions.

•   Check for a dial tone. If no dial tone is heard, see “No dial tone”.
You experience static, noise, or fading in and out
•   The handset may be out of range of the base. Move closer to base.
•   Make sure base is not plugged into an electrical outlet with another 

household appliance. If necessary, relocate the base.

•   Charge the battery (for 14 hours).
Memory dialing doesn’t work
•   Did you follow proper dialing sequence?
Unit locks up and no communication between the base and cordless 

handset
•   Unplug the power adaptor from the electrical outlet and the bottom of 

the base. Remove the handset battery. Wait for 30 seconds and plug the 

power adaptor back into the base and electrical outlet. Reconnect the 

battery and charge for 14 hours.