Aiphone IS 用户手册

下载
页码 28
3
PRECAUTIONS
 General Prohibitions    
 Prohibition to Dismantle the Unit    
 Prohibition on Subjecting the Unit to Water    
 General Precautions  
WARNING
Negligence could result in death or serious injury.
1. Do not dismantle or alter the unit. Fire or electric shock could 
result.
2. Keep the unit away from water or any other liquid.
Fire or electric shock could result.
3. High voltage is present internally. Do not open the case. 
Electric shock could result.
4. The unit is not of explosion-proof. Do not install or use near 
gases or fl ammable materials. Fire or explosion could result.
5. Do not connect any non-specifi ed power source to the +, - 
terminals. Also, do not install two power supplies in parallel to a 
single input. Fire or damage to the unit could result. Be sure to 
connect a single power supply unit to a control unit.
6. Do not connect any terminal on the unit to an AC power line. 
Fire or electric shock could result.
7. Do not use power supply with a voltage other than specifi ed. 
Fire or electric shock could result.
8. Keep AC cord from being marred or crushed. If the AC cord is 
fractured, fi re or electric shock could result.
9. Do not plug or unplug with wet hands. Electric shock could result.
10. Insert AC plug completely and securely into AC outlet. 
Otherwise, fi re or electric shock could result.
11. Do not put any metal or fl ammable material into the unit through 
the openings. Fire, electric shock, or unit trouble could result.
12. The unit must be installed and wired by a qualifi ed technician.
13. Existing wiring such as chime wiring, etc. may contain high voltage 
AC electricity. Damage to the unit or electric shock could result. 
Wiring and installation should be done by a qualifi ed technician.
CAUTION
Negligence could result in injury to people or damage to property.
1. Do not install or make any wire terminations while power supply 
is plugged in. It can cause electrical shock or damage to the unit.
2. When mounting the unit on a wall, install the unit in a 
convenient location, but not where it could be jarred or 
bumped. Injury could result.
3. Before turning on power, make sure wires are correctly 
connected, not crossed or not shorted. If not, fi re or electric 
shock could result.
4. Do not install the unit in locations subject to frequent vibration or 
impact. It may fall or tip over, resulting in damage to the unit or 
personal injury.
5. For power supply, use Aiphone power supply model or model 
specifi ed for use with system. If non-specifi ed product is used, 
fi re or malfunction could result.
6. On products with ground terminals, connect to an earth ground. 
Fire or malfunction could result.
7. For DC powered systems, use Aiphone power supply model 
specifi ed with system. If non-specifi ed product is used, fi re or 
malfunction could result.
8. Do not put high pressure on the monitor. If fractured, injury 
could result.
9. If LCD is punctured, do not allow contact with the liquid crystal 
inside. Infl ammation could result. If necessary, gargle your 
mouth and clean your eyes or skin with clear water for at least 
15 minutes, and consult your doctor.
10. Do not put anything on the unit or cover the unit with cloth, etc. 
Fire or unit trouble could result.
11. Do not install the unit in any of the following locations. Fire, 
electric shock, or unit trouble could result.
Places under direct sunlight or places near heating 
equipment that varies in temperature.
Places subject to dust, oil, chemicals, hydrogen sulfi de (hot 
spring).
Places subject to moisture and humidity extremes, such as 
bathrooms, cellars, greenhouses, etc.
Places where the temperature is quite low, such as inside a 
refrigerated area or in front of an air conditioner.
Places subject to steam or smoke (near heating or cooking 
surfaces).
Where noise generating devices such as dimmer switches or 
inverter electrical appliances are closeby.
12. Be sure to perform a call test or check the volume with the 
handset on the hook. If you operate the hook switch with the 
handset on your ear, a sudden call etc. may arrive causing 
damage to your ear.
GENERAL PRECAUTIONS
1. Keep the unit more than 1 m (3.3') away from radio or TV.
2. Keep the intercom wires more than 30cm (12'')  away from AC 
100-240V wiring. AC induced noise and/or unit malfunction could 
result.
3. Install the unit in an area that will be accessible for future 
inspections, repairs, and maintenance.
4. As to other manufacturer’s devices (such as sensor, detectors, 
door releases) used with this system, comply with the 
Specifi cations and Warranty conditions that the manufacturers or 
venders present.
5. If the unit is down or does not operate properly, turn off the power 
switches and unplug the power supply.
6. If it is used close to a cellular phone, the unit may malfunction.
7. The unit can be damaged if dropped. Handle with care.
8. The unit turns inoperative during power failure.
9. In areas where broadcasting station antennas are close by, the 
intercom system may be affected by radio frequency interference.
10. All the units, except for door station, is designed for indoor use 
only. Do not use outdoor.
11. This product, being a control unit of door release, should not be 
used as a crime prevention device.
12. It must be noted in advance that the LCD panel, though 
manufactured with very high precision techniques, inevitably will 
have a very small portion of its picture elements always lit or not lit 
at all. This is not considered a unit malfunction.
13. Door station is weather-resistant, but do not spray with high-
pressure water. Unit trouble could result.
14. For wiring, specify CAT5e/6 straight cable.
15. Due to the environmental sound around the unit, it may hinder 
smooth communication, but this is not a malfunction.
16. When outside temperature lowers sharply after rainfall, etc., the 
inside of camera may fog up slightly, causing a blurry picture, but 
this is not a malfunction. Normal operation will be restored when 
moisture evaporates.
17. Do not locate the units in a location with restricted access. It 
impedes maintenance inspection or repairs. Also, unit trouble 
could result.