Honeywell HRDE4X4 用户手册
Rev 2.00
14
Document 900.0399
03/06
Live Mode
To set values for live video display, use the UP and DOWN controls to navigate through the
menu items. Change the value of the menu item using the LEFT and RIGHT controls.
menu items. Change the value of the menu item using the LEFT and RIGHT controls.
Figure 3-3
Live Mode Setup Screen
Follow
to set the Live Mode parameters.
Table 3-3
Live Mode Setup Fields
Field
Description
OSD
Enable/disable on-screen display.
SEQUENCE
Enable/disable sequential display of video in Full Screen mode.
SEQ-DWELL TIME
Set the Dwell time for each channel display in Sequential Display
mode (choose from 1–60 seconds).
mode (choose from 1–60 seconds).
SCREEN
CROPPING
CROPPING
Enable/disable cropping to make the display fit the screen.
TRANSPARENT
Change the transparency level of the on-screen display.
CHANNEL
Select the channel (camera 1–4) for applying the six following
settings. Any changes you make will immediately take effect with
the selected channel.
Press SEL to enter a text insertion screen and apply a new name
for the channel. Use the LEFT and RIGHT arrow controls to
navigate through the channel name and the UP and DOWN arrow
controls to change the selected character. Press SEL to confirm
the name.
settings. Any changes you make will immediately take effect with
the selected channel.
Press SEL to enter a text insertion screen and apply a new name
for the channel. Use the LEFT and RIGHT arrow controls to
navigate through the channel name and the UP and DOWN arrow
controls to change the selected character. Press SEL to confirm
the name.
DISPLAY
Enable/disable display of the video channel in Live Display mode.
SEQ LIST
Enable/disable the specified channel to be included in the
Sequential Display mode.
Sequential Display mode.
BRIGHTNESS
Change the brightness value for the specified channel.