Hitachi DZ-BD10HA 用户手册

Disc cover cannot be 
closed.

Is the disc correctly inserted?
Remove the disc and then reinsert it.

23

Connect a fully charged battery or AC adapter/charger, 
and then turn the camcorder on and try again.

18, 25

Operating noise is 
heard.

This is not a fault. A quiet operating sound is heard as the 
disc rotates during recording or playback, etc.

—

Some vibrations are 
felt or slight sound is 
heard from 
mechanism.

These vibrations or sound are caused by HDD/disc drive. 
This does not indicate a fault.

—

• No operation can 

be performed 
because the 
ACCESS indicator 
on this camcorder 
remains lit or 
flashing.

• After a disc or 

card is inserted, it 
takes some time 
until recording is 
possible.

In the following cases, it will take more time than usual 
until operation is possible:
• Immediately after a disc is inserted.
• When a long time has elapsed since the camcorder was 

turned off last.

• When the temperature is greatly different from the 

status of previous recording.

• When a scratched or dirty disc is inserted.
• When the camcorder is subjected to strong vibrations.
• When the battery or DC power cord was disconnected 

before turning the power switch off.

—

No image appears on 
the LCD screen.

• Is the camcorder connected to a PC with a USB cable?

Disconnect the USB cable.

• In playback mode, did the last scene viewed end in a 

wipe to black edit?
Press .

68, 81