Hitachi DZ-BD10HA 用户手册

Attaching the separately 
sold lenses

Focusing range

• T (telephoto) side:

Approx. 3.2 feet (1 m) from the lens 
surface to infinity.

• W (wide-angle) side:

Approx. 13/16

″ (2 cm) from the 

lens surface to infinity.

Use the tele-conversion lens (DZ-
TL43 (sold separately) to increase the 
telephoto effect, and the wide-
conversion lens DZ-WL43 (sold 
separately) to increase the wide-angle 
effect.
Make sure that the filter diameter is 
43mm and the screw pitch 0.75mm.

Notes

• If you attach the DZ-TL43 conversion 

lens, the focusing range at the T 
(telephoto) side will be from approx. 
9.84 feet (3 m) to infinity.

• When the white balance doesn’t 

function, adjust the white balance 
manually (p.49).

If it is difficult to adjust the focus 
automatically, you can adjust it 
manually (Manual Focus). (See also 
the hints on p.46.)

• When you zoom while the conversion 

lens is attached, the four corners of the 
screen may become a little dark or 
scratchy at the W (Wide) side. (The 
four corners may not be evenly dark.)

• When you are recording still pictures 

with the wide-conversion lens 
attached, the four corners of the 
screen will become dark at the W 
(Wide) side. If this happens, make it 
less wide.

• When changing lenses, be careful not 

to drop the camcorder.

• Attaching a conversion lens will 

prevent you from using the flash. 
Turn the “Flash” setting to “Off” 
(p.52).