Hitachi DZ-BD10HA 用户手册

Selecting a flash mode

Turning Off/On the 
recording indicator

Press the confirmation button 
to confirm, then MENU to end.
• The flash setting is retained in 

memory even when the power 
is turned off.

Hints

• There may be cases when the 

recorded pictures are out-of-focus in 
dark places even if the flash is used.

• “

” flashes in the LCD monitor 

while the flash is recharging and 
the flash will not fire.

• If the subject is too close, image 

smearing may occur.

Notes

• When a conversion lens is attached, 

adjust the “Flash” setting to “Off”. 

• Although the flash range differs 

according to the subject, as a 
reference, its range is about 3.2–8.2 
feet (1–2.5 m) in dark places. 

• Although the amount of light emitted 

will automatically be adjusted at 
time of emission, the flash may not 
be sufficiently adjusted if the 
distance to the subject is too distant 
or too near. 

• When recording consecutive shots 

using the flash, the flash may not fire 
or the amount of light emitted may 
not be sufficiently adjusted.

• Do not emit the flash close up in 

front of a person’s eyes.

You can turn the indicator off when 
recording through reflective objects 
such as glass or a fish tank, etc., so its 
reflection is not recorded.

Press the confirmation button 
to confirm, then MENU to end.
• The recording indicator setting 

is not displayed in the on-
screen information.

• Even if the recording indicator 

is set to “Off”, it will still light 
while the self-timer is counting 
down (p.55).

• Do not fire the flash at the driver/

rider of a moving vehicle or bicycle, 
etc.

• Do not use the flash in locations 

where flammable or combustible gas 
is present. Doing so may cause the 
gas to ignite or explode.