Hitachi DZ-BD10HA 用户手册

„ Before importing scenes from BD-R/DVD-RW/DVD-

R to your PC

You need to finalize the disc using the disc navigation screen on the camcorder 

(p.77). Finalizing is not required for importing scenes from HDD/BD-RE/DVD-
RAM/SD card.

„ Connecting the camcorder to your PC

Turn on the camcorder power.
When connecting the camcorder to a PC, connect the camcorder to a wall 
outlet instead of using the battery pack.

Choose the medium for connection to the PC (“HDD”, ”BD/DVD”, 
”SD CARD”). 
The media selected on your camcorder before connecting to a PC can be 
accessed when the connection is established.

 

After the physical connection, the camcorder’s LCD monitor goes out and 
the camcorder-PC connection begins.
The camcorder is automatically recognized from the PC. After recognition, 
there are occasions when you will be required to restart the PC. In this case, 
restart the PC according to the indicated instructions.

Notes

• Be sure to turn on the camcorder power when connecting it to a PC.
• You cannot access to more than one media (HDD/BD/DVD/SD Card) at the same 

time.

• You cannot change the medium or the mode (movies/stills) while the camcorder is 

connected to a PC. Disconnect the USB cable from the PC (p.82) first to change the 
medium or the mode (movies/stills).

• During PC connection, none of the camcorder buttons operates. 
• When the HDD or BD/DVD is being accessed, the ACCESS indicator flashes in red.
• Note that the CARD ACCESS indicator does not flash even when the SD memory 

card in the camcorder is being accessed.