JVC DR-M1SLB 用户手册

下载
页码 116
Filename [DR-M1EK_08Recording.fm]
Masterpage:Left+
Page 64
September 4, 2003 11:33 am
TIMER RECORDING (cont.)
64
When programmes overlap each other
If “PROGRAM OVERLAPPED” appears, you have another 
programme overlapping the programme you have just made.
Confirm with the arrow on “OK”, then press PROG/CHECK
Programme Check screen appears and conflicting programmes 
will be highlighted in pink.
Example: Programme 3 (you have just made) and 
Programme 4 overlap each other.
A
Confirm the overlapping programmes.
Overlapping programmes appear on the TV screen.
NOTE:
If you do not mind this overlap, press PROG/CHECK to finish 
the timer programme setting. The programme with the lower 
programme number will be recorded and the other one will not 
be recorded correctly. If no changes are made for approximately 
1 minute, the unit will return to the normal screen.
B
Select the desired programme to be cancelled 
or changed.
Press 
rt.
To cancel the programme
Press 
&.
● “THE TIMER PROGRAMMING SETTING WAS CANCELLED” 
appears on the TV screen for about 5 seconds, then the normal 
screen resumes.
To change the programme setting
Press ENTER.
C
Change the programme setting.
● Refer to steps D – J in “Manual Timer Programming” 
(
pg. 58).
D
Check if the conflict has been settled.
Press PROG/CHECK.
● Programme check screen appears.
E
Engage the unit’s timer mode.
● Refer to step F in “Check, cancel and change programmes” 
(
pg. 63).
NOTE:
When any overlaps remain after deletion and modification of 
programmes, Programme Check screen remains showing the 
conflicting programmes. In such a case, repeat the procedure 
above until the conflict is solved.
DR-M1EK_08Recording.fm  Page 64  Thursday, September 4, 2003  11:34 AM