Technika STBHDIS2010 用户手册

23 

 

You can restore the default settings for your 
box to the original factory values:
1. Press the 

MENU button.

2. Press the

▼  button to select the ‘Install’ 

    option.
3. Press the 

◄ and ►buttons to select the

    ‘Factory Reset’ option.
4. Press 

OK to begin.

5. You are asked to confirm that you want to
    proceed. Press the 

OK or BACK button if 

    you do not want to re-tune, otherwise 

Note: You should re-tune your box 
if you move home.

Note: You should re-tune your box
periodically because new channels
may become available.

CAUTION:  RETURNING  THE 
BOX TO ITS FACTORY DEFAULT 
CLEARS ALL SETTINGS. 

THE PIN IS RESTORED TO THE 
DEFAULT ‘0000’ VALUE

Note:  To  prevent  accidental 
erasure,factory  reset  does  not 
reset the Channel Zero settings in 
your box.

To perform a full reset that includes 
also the Channel Zero settings, 
press the following sequence of 
buttons: MENU, 2, 7, 1, 8, 2, 8, 4,    
5, 9, 0. 

The  box  will  go  into  standby 
automatically

3. Press the 

OK button to begin.

4. You are asked to confirm whether you  
    want to proceed. Press the 

OK or BACK 

    button if you do not want to re-tune, 
    otherwise press 

►and then OK to 

    confirm.
5. The box searches for and displays all the   
    available TV and radio channels.
6. Once the automatic search has been
    completed, all channels are stored and the
    first available channel is shown.

The Version menu shows hardware and
software information.

To see the version number:
1. Press the 

MENU button, then press the

   ▲ /

▼ / ◄ and ► buttons to navigate to  

press 

►and then OK to confirm.

Once the 

"OK" button press, a password 

require  dialog  display,  enter  the  correct 
password to perform the factory reset (default  
password is 0000).