Sony TRV80 用户指南

Choose a connection mentioned on page 91, and connect audio equipment or
microphone to your camcorder. Then follow the procedure below using the touch panel
or the Remote Commander supplied with your camcorder.

The POWER switch should be set to 

.

Operate by touching the panel.

(1) Insert the recorded tape into your camcorder.
(2) Locate the recording start point. Press 

 to start playing back. To pause

playing back, press 

 at the recording start point. You can fine-adjust the

recording start point by pressing 

/

.

(3) Press FN and select PAGE3.
(4) Press A DUB CTRL.

The A DUB CTRL screen appears.

(5) Press AUDIO DUB. The green 

X

 indicator appears on the screen.

(6) Press 

 on your camcorder and at the same time start playing back the

audio you want to record.
The new sound is recorded in stereo 2 (ST2) during playback. While recording
new sound, the red 

 indicator appears on the screen.

(7) Press 

 on your camcorder at the point where you want to stop recording.

The POWER switch should be set to 

.

(1) Follow the step 1 and 2 in “Using the touch panel.”
(2) Press AUDIO DUB on the Remote Commander.

The green 

X 

indicator appears on the screen.

(3) Press X on the Remote Commander and at the same time start playing back

the audio you want to record.
The new sound is recorded in stereo 2 (ST2) during playback. While recording
new sound, the red 

 indicator appears on the screen.

(4) Press x on the Remote Commander at the point where you want to stop

recording.

x

X

N

RET.

AUDIO
DUB

A  DUB  CTRL