Speco Technologies CS16 用户手册
16-Channel Digital Video Recorder
15
You can set up holidays by highlighting + and pressing the
button. The current date appears.
button. The current date appears.
Highlight the month and day and change them by using the
Up and Down arrow buttons. Press the button to add the
date. Dates can be deleted by highlighting the beside the
date and pressing the button.
Up and Down arrow buttons. Press the button to add the
date. Dates can be deleted by highlighting the beside the
date and pressing the button.
NOTE: Holidays that do not fall on the same date each
year should be updated once the current year’s
holiday has passed.
holiday has passed.
Figure 11 — Holiday setup screen.
Highlighting the Time Sync. tab causes the Time Sync. screen to display. You can set up time synchronization between
the DVR and standard time servers that are available in most time zones and countries, or between the DVR and another
DVR.
the DVR and standard time servers that are available in most time zones and countries, or between the DVR and another
DVR.
Figure 12 — Time Sync. screen.
Highlight the box beside Automatic Sync. and press the
button. This toggles between On and Off.
button. This toggles between On and Off.
Highlight the box beside Time Server and press the button.
A virtual keyboard appears that you can use to enter the IP
address or domain name of the time server. Highlighting
allows you to select your time server from a list of registered
time servers.
A virtual keyboard appears that you can use to enter the IP
address or domain name of the time server. Highlighting
allows you to select your time server from a list of registered
time servers.
NOTE: You can use the domain name instead of IP address
if you already set up the DNS Server when setting
up the LAN.
up the LAN.
Highlight the box beside Interval and press the button. Set
the time interval for synchronization from 30 minutes to 1 day
at various time intervals.
the time interval for synchronization from 30 minutes to 1 day
at various time intervals.
Last Sync-Time displays the last time the DVR was synchronized with the time server.
Highlight Run as Server and press the button. Pressing the button toggles between On and Off. When it is On,
the DVR you are setting up will run as a time server.
the DVR you are setting up will run as a time server.
Storage
Highlight Storage in the System menu and press the button. The Storage setup screen appears and displays
information about the DVR’s storage devices.
The information in the Type column describes the storage
device.
device.
The capacity of the storage device is displayed in the Capacity
column.
column.
The Format column displays whether the device is used for
recording (Record) or not (Not Using). Not formatted
indicates the device is not formatted.
recording (Record) or not (Not Using). Not formatted
indicates the device is not formatted.
Figure 13 — Storage Information screen.