Sanyo DSR-3506P 用户手册

English

101

SPECIFICATIONS

Note that product appearance and specifications are subject to change without prior notice.

Specifications

Product name

Digital video recorder with multiplexer function

Product number

DSR-3506P

Hard disk capacity

80 GB [Capability for expansion using 80, 160, 250, or 300 GB hard disks (sold separately)]

Television system

PAL signal standard

Image compression

M-JPEG

Picture resolution

720 x 288 (fields)

Recording type

Field recording

Picture quality

5 levels [Basic, Normal, Enhanced, Fine, Super Fine]

Recording rate

27 levels (60.00 to 0.03 FPS)

Recording areas

Normal recording area, Alarm recording area, Archive area

Magnification

x2 digital zoom using the [ZOOM] button

Search modes

Time/date search, Alarm search, Alarm thumbnail search, Archive area search, Motion
detection search

Date/clock settings

Day, Month, Year (last two digits), Hours, Minutes, Seconds

Date and time positions

2 position; upper and lower (display may also be turned off)

Camera title display

Each channel; up to 10 alphanumeric characters and symbols (display may also be turned
off)

Memory backup

Approximately 30 days (for 48 hours of electrification)

Video input terminal

VBS/VS, 1.0 V (p-p), 75

Ω, BNC (x6)

Video output terminal

Through output of each video input, BNC (x6)

Main monitor output terminal

VBS 1.0V (p-p), 75

Ω, BNC (x1)

Monitor 2 output terminal

VBS/VS 1.0V (p-p), 75

Ω, BNC (x1)

Audio input terminal

-8 dBs, 27 k

Ω, unbalanced RCA (x1)

Audio output terminal

-8 dBs, 600

Ω, unbalanced RCA (x1)

Microphone input terminal

-60 dBs, 10 k

Ω, unbalanced 3.5 mm pin jack (x1)

CompactFlash card slot

CompactFlash Type 2 (front panel) (x1)

Terminals

LAN terminal

10BASE-T/100BASE-TX, RJ-45 (x1)

RS-485 terminal

RJ-11 (x2)

Remote control input terminal Two-wire voltage control (x2)

Alarm input terminals

No-volt contacts (with a pulse width of 100 ms or more) (x6)

Alarm output terminal

Active Low, Open collector Max. 500 mA (x1)

Sensor alarm output terminals Open collector, Low level active (Max. 25 mA) (x6)

Alarm reset input terminal

No-volt contacts (with a pulse width of 100 ms or more) (x1)

Non rec output terminal