Sanyo DSR-3506P 用户手册
RECORD SET
3
74
English
SETTINGS
z
Motion sensor positions are common for T-1 through
T-4, and different settings cannot be made.
T-4, and different settings cannot be made.
15
Turn the shuttle dial counter-clockwise.
Motion sensor settings are confirmed and the <ALARM
REC MODE SET> screen is displayed once again.
REC MODE SET> screen is displayed once again.
To stop motion sensor recording
Set the sensitivity level from the motion sensor setting
screen to “OFF”.
screen to “OFF”.
z
The period for “T-1” through “T-4” as set in step 9
changes to that of “TIME PERIOD A” or “TIME PERIOD
B” on P.50.
changes to that of “TIME PERIOD A” or “TIME PERIOD
B” on P.50.
z
The sensitivity level can be checked using the setting
screen. When motion is detected, the sensor color
changes from green to red, and a buzzer is sounded.
If detection is too sensitive, an alarm can be triggered
even by slight changes in lighting; accordingly, the
sensitivity level should be set to match the camera
location.
screen. When motion is detected, the sensor color
changes from green to red, and a buzzer is sounded.
If detection is too sensitive, an alarm can be triggered
even by slight changes in lighting; accordingly, the
sensitivity level should be set to match the camera
location.
1
Press the [MENU] button and turn the
jog dial to select “2. RECORD SET”, and
then turn the shuttle dial.
jog dial to select “2. RECORD SET”, and
then turn the shuttle dial.
The <RECORD SET> screen is displayed.
2
Turn the jog dial to select “8. ALARM
OPERATION SET”, and then turn the
shuttle dial clockwise.
OPERATION SET”, and then turn the
shuttle dial clockwise.
The <ALARM OPERATION SET> screen is displayed with
the cursor positioned on “ALARM RETRIGGER”.
the cursor positioned on “ALARM RETRIGGER”.
3
Turn the shuttle dial clockwise.
“OFF” flashes in the “ALARM RETRIGGER” field.
4
Turn the jog dial to set the alarm trigger
to “ON”, and then turn the shuttle dial
clockwise.
to “ON”, and then turn the shuttle dial
clockwise.
The cursor moves to “MAIN MON. DISPLAY”.
[Settings] ( indicates the default setting)
Setting alarm operation and display
MENU
Setting
Description
OFF
Even if a new alarm is received on the same
channel during alarm recording, the duration is not
extended.
channel during alarm recording, the duration is not
extended.
ON
If a new alarm is received on the same channel
during alarm recording, the duration is extended and
both alarms are treated as one. (Example: Input in
the alarm sequence A
during alarm recording, the duration is extended and
both alarms are treated as one. (Example: Input in
the alarm sequence A
→ B → C) However, if the
new alarm is on a different channel, the alarms are
treated separately. (Example: Input in the alarm
sequence A
treated separately. (Example: Input in the alarm
sequence A
→ B → C)
CH1
CH2
Alarm
Alarm
Alarm Recording A
Example:
Alarm
Alarm Recording C
Alarm Recording B
e00_l8hbe_xe_7.book Page 74 Tuesday, April 27, 2004 10:35 AM