Sanyo DSR-3506P 用户手册
GENERAL SET
4
86
English
SETTINGS
[Settings] ( indicates the default setting.)
4
Turn the shuttle dial clockwise and turn
the jog dial to set “STATUS INFO”, and
then turn the shuttle dial clockwise.
the jog dial to set “STATUS INFO”, and
then turn the shuttle dial clockwise.
The cursor moves to “ALARM INFO”.
[Settings] ( indicates the default setting.)
5
Turn the shuttle dial clockwise and turn
the jog dial to set “ALARM INFO”, and
then turn the shuttle dial clockwise.
the jog dial to set “ALARM INFO”, and
then turn the shuttle dial clockwise.
The cursor moves to “ADDRESS”.
[Settings] ( indicates the default setting.)
6
Turn the shuttle dial clockwise and turn
the jog dial to set “ADDRESS”, and then
turn the shuttle dial clockwise.
the jog dial to set “ADDRESS”, and then
turn the shuttle dial clockwise.
[Setting conditions]
Addresses between “0” and “127” can be set for this unit.
Addresses between “0” and “127” can be set for this unit.
7
Press the [EXIT] button.
The setting procedure is ended and the display returns to
the normal screen.
the normal screen.
Setting
Description
DATA
SPEED
SPEED
2400, 4800, 9600, 19200
Setting
Description
ON
Status information is transmitted.
OFF
Status information is not transmitted.
Setting
Description
ON
Alarm information is transmitted.
OFF
Alarm information is not transmitted.
EXIT
e00_l8hbe_xe_7.book Page 86 Tuesday, April 27, 2004 10:35 AM